7.10.1.1 Trigger Output Functions
List of the functions in the
Trigger
pulldown menu:
Disable
No function on this output
Button 1
Activates the trigger output when Preset 1 is selected
Button 2
Activates the trigger output when Preset 2 is selected
Button 3
Activates the trigger output when Preset 3 is selected
Button E
Activates the trigger output when the
Enter
mode is activated
Ready
Activates the control output shortly after readiness of operation is achieved.
Note: Trigger outputs are generated each time a change in preset selection takes place or enter mode is
activated. If for example button 1 is pressed repeatedly, this will not generate repeated trigger output
actions.
7.10.1.2 Trigger Output Actions
List of the signal form in the
Action
pulldown menu:
Tally
The control signal is active during the entire function duration
Pulse On
Activating the function generates a pulse. The pulse duration can be set in Pulse Duration.
Pulse Off
Terminating the function generates a pulse. The pulse duration can be set in Pulse Duration.
Pulse On/Off
Activating and terminating this function generates a pulse. The pulse duration can be set in Pulse
Duration.
7.10.2 Range: Pulse Duration
For the Pulse Trigger Output signal wave the
Pulse
duration can be set in the
Pulse Duration
pulldown
menu. Available pulse durations are
- 50 ms
- 100 ms
- 1000 ms
VIP
digital
Manual 4.0 Yellowtec 2004 Rev. 26.07.2004
Page 36
