7.9.2 Range: Access Internal Preset
VIP
digital
stores 100
Internal Presets
. 3 of these presets are enabled for a direct selection via the
Preset Recall button
s. As a default preset no. 1/2/3 refer to the buttons 1/2/3.
Define here whether the assignment of the 3 enabled presets can be modified on VIP
digital
(offline,
without PC).
Refer to the chapter Unit Description / Enter mode /
Assign Preset
enabled
A modification to the preset selection on VIP
digital
is possible.
disabled
A modification to the preset selection on VIP
digital
is not possible.
Note: An Assign Preset
setting which has been performed on the VIPdigital
unit
is stored in a cap-
buffered RAM for approx. 24 hrs. after the unit has been switched off. After this time VIP
digital
will
return to the default setting.
7.9.3 Range: Preset Order
The Assign Preset function can be used in the Enter mode to assign 100
internal presets
of VIP
digital
to the Preset Recall buttons.
Preset Order
defines the sequence in which the presets are to appear in
the display when the Selector is turned.
Order Internal Presets by number
Internal presets are sorted by a
preset number
Order Internal Presets by name
Internal presets are sorted by a
preset name
7.9.4 Range: Replace Internal Preset
The VIP
remote
software allows the 100
internal presets
of your VIP
digital
to be overwritten with new
data by clicking on the
SAVE TO VIP
button.
Activate the
Enabled
checkbox to enable overwriting.
If the checkbox is not activated, the
Save to VIP
command is disabled in VIP
remote
.
VIP
digital
Manual 4.0 Yellowtec 2004 Rev. 26.07.2004
Page 32
