Note: A transmission of unsuitable or faulty data or interruptions during the data transmission to the
base unit may corrupt the function of VIP
digital
permanently. In this case the unit can only be
commissioned by the manufacturer.
Enter the
file name
(see below) of the new firmware to be transferred into the text line, e.g.
VIPfirmw401.vup
(this designation is an example only).
If the firmware is in the same folder as the active configuration software, the entry of the file name will
suffice. If the firmware is not in the same folder as the active configuration software, enter the
complete path, e.g..
C:\Yellowtec\VIPdigital/VIPfirmw401.vup
(an example only)
Click on the
YES
button if you are sure that your entries are correct.
The progress of transmission is shown (window: Processing...) Never interrupt this process.
After successful transmission both Processing window and Update window close automatically.
7.8 Menu: Help
7.8.1 Sub-menu: Help F1
Selecting this sub-menu opens the online manual with Acrobat Reader. Instead, the key F1 may be
pressed.
Refer to the chapter Prior to Beginning / Manual Conventions /
Screen Use
for detailed information.
7.8.2 Sub-menu:
About
Calls the Info window, displaying the software and
firmware version numbers.
Software: Configuration software ...
Firmware: VIP
digital
software ...
Only the first digits with a period after the first digit
are important (e.g. 4.01).
IMPORTANT: This information is only updated
during the start of the configuration software.
To check the version number after a firmware
update, exit the configuration software. Restart the
configuration software and open the Info window.
In addition, you can also find our contact and web
address as well as the exact product designation there.
The figure on the right side shows the display for version 4.01 (example).
Contact your dealer or Yellowtec for the current version.
VIP
digital
Manual 4.0 Yellowtec 2004 Rev. 26.07.2004
Page 30
