Operating Instructions
1.
TURN ON:
Press the ON/OFF button once to turn on and again
to turn off.
NOTE:
Hold button down for approximately 1 second
to turn unit off.
2.
WARM UP
: The detector automatically starts heating the
sensor. During the heating cycle, the detector will sound a slow
“beep”. Warm up is usually less than 20 seconds.
3.
READY
: The detector is ready to begin searching for leaks
when the the green Norm sensitivity LED turns on and the audio
“beep” increases in frequency.
2
Low Battery
Indicator
Sensitivity Level
H
2
Leak Detector Control Panel
Low battery indicator
Sensitivity level indicator
Sensitivity adjust
Power On/Off
3
To order call 1-800-548-1191 or visit www.partdeal.com - [email protected]
