MyPBX U500 Installation Guide
http://www.yeastar.com 9/13
Figure 3-4 Connection of BRI ports
3.2.3 Connection of FXS ports
The FXS port could be connected to an analog phone with a phone line.
For instance, if No.6 and No.8 connectors are FXS ports, the connection could be depicted as below:
Figure 3-5 Connection of FXS ports
3.2.4 Power Connection
Once users have made sure that device installation, cable connection and power type is correct, please
switch on the power. Then MyPBX U500 will start booting. In the meantime, users would see that the
‘POWER’ and ‘RUN’ indicator lights would turn on.
Please switch off the power before plugging or unplugging the cables.
