MyPBX U500 Installation Guide
http://www.yeastar.com 6/13
Console port
For debugging
USB port
Ethernet ports
MyPBX U500 provides two 10/100/1000M adaptive RJ45 Ethernet ports, marked as LAN
and WAN.
-
LAN port
: LAN port is for the connection to Local Area Network (LAN).
-
WAN port
: WAN port is the network port for the connection to internet. It supports ‘DHCP
server’, ‘PPPoE/dynamic DNS’, and “static IP” for IP address assignment.
Reset Button
Press the reset button to restore the factory defaults
Please make sure that you
’
d like to reset because once reset, the previous
configurations would be erased automatically.
Power port
For the connection of a power adapter to input 100~240V
、
50~60HZ AC power
2.3 Specifications and Operating Environment
Description
Size
L 438 * W 280 * H 44 (mm)
Power Supply
220V,50
～
60Hz
Operating Temperature
0°C~50°C
(
32°F~122°F)
Storage Temperature
-10°C~65°C
(
14°F~149°F)
Operating Humidity
5%~90%
(
Non-condensing)
Storage Humidity
0%~95%
(
Non-condensing)
Weight
3.4kg
3. MyPBX U500 Installation
To avoid unexpected accident, personal injury or device damage, please read the following instructions
before installing MyPBX U500.
3.1 Placement Instructions
Ambient Temperature: to avoid overheating, please do not run MyPBX U500 in the place where the
ambient temperature is above 122
℉
(50
℃
).
Ventilation: please make sure that the device has good ventilation around.
Anti-jamming—there may be some sources of interference that might affect the normal running of
MyPBX U500. It’s highly recommended that the device
Should be placed away from high-power radio, radar transmitters and high frequency, and
high-current devices.
Is using independent power junction box and effective anti-grid interference measures have been
taken.
Mechanical load--Please make sure that the device is placed steadily to avoid any accident that might
cause damage. If placed on the desktop, please ensure it is horizontally placed.
