Yealink Yealink SIP-T46G, Руководство администратора

Страница: 396 / 625

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
382
message. A GET request may contain variable named as “key” and variable value,
which are separated by “=”. The valid URI format is: http(s)://phone IP
address/servlet?key=variable value.
The following table lists pre-defined variable values:
Variable Value Phone Action
OK Press the OK key.
ENTER Press the Enter soft key.
SPEAKER Press the Speakerphone key.
F_TRANSFER Transfers a call to another party.
VOLUME_UP Increase the volume.
VOLUME_DOWN Decrease the volume.
MUTE Mute a call.
F_HOLD Place an active call on hold.
X
Cancel actions or reject incoming calls or
mute or un-mute calls.
0-9/*/POUND Press the keypad (0-9, * or #).
L1-LX
Press the line keys (for SIP-T48G, X=29, for
SIP-T46G/T29G, X=27, for SIP-T42G/T41P,
X=15, for SIP-T27P, X=21, for SIP-T23P/G,
X=3, for SIP-T21(P) E2, X=2).
F1-F4 Press the soft keys.
MSG Press the MESSAGE key.
HEADSET Press the HEADSET key.
RD Press the RD key.
UP/DOWN/LEFT/RIGHT Press the navigation keys.
Reboot Reboot the phone.
AutoP Perform auto provisioning.
DNDOn Activate the DND mode.
DNDOff Deactivate the DND mode.
number=xxx&outgoing_uri=y Place a call to xxx from SIP URI y.
OFFHOOK Pick up the handset.
ONHOOK Hang up the handset.
ANSWER Answer a call.