Yealink W80, Руководство администратора

Страница: 110 / 260

Security Features
107
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Auto Logout Time
Auto logout time defines how long the phone will log out of the web user interface automatically when you do not
perform any actions on the web user interface. Once logging out, you must re-enter username and password for
web access authentication.
Topic
Auto Logout Time Configuration
Auto Logout Time Configuration
The following table lists the parameter you can use to configure the auto logout time.
Parameter features.relog_offtime <y0000000000xx>.cfg
Description It configures the timeout interval (in minutes) for web access authentication.
Permitted
Values
Integer from 1 to 1000
Default 5
Web UI Features > General Information > Auto Logout Time(1~1000min)
Base PIN
To avoid unauthorized registration or access to some features on the handset, you should keep the base PIN
secret.
You can change the base PIN for security.
Topic
Base PIN Configuration
Base PIN Configuration
The following table lists the parameters you can use to configure the base PIN.
Parameter base.pin_code <y0000000000xx>.cfg
Description It configures the base PIN.
Permitted
Values
Integer from 0000 to 9999
Default 0000
Web UI Security > Base PIN > Base Unit PIN
Parameter base.double_pin_code.enable <y0000000000xx>.cfg
Description It enables or disables double PIN feature.
Permitted
Values
0 -Disabled, users use the PIN configured by "base.pin_code" to register the handset or access some
features.
1 -Enabled, users use the PIN configured by "base.pin_code_for_register" to register the handset, and
use the PIN configured by "base.pin_code" to access some features.