Yealink VC400, Руководство администратора

Страница: 246 / 299

Administrator’s Guide for Yealink Video Conferencing Systems
230
Parameter Description Configuration Method
HTTP
Enables or disables the user to
access the web user interface of the
system using the HTTP protocol.
Default:
Enabled
Note:
If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
HTTP Port
Specifies the HTTP port for the user
to access the web user interface of
the system.
Valid Values:
1-65535
Default:
80
Note:
Ensure that the configured
port is not used. If you change this
parameter, the system will reboot to
make the change take effect.
Web User Interface
HTTPS
Enables or disables the user to
access the web user interface of the
system using the HTTPS protocol.
Default:
Enabled
Note:
If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
HTTPS Port
Specifies the HTTPS port for the user
to access the web user interface of
the system.
Valid Values:
1-65535
Default:
443
Note:
Ensure that the configured
port is not used. If you change this
parameter, the system will reboot to
make the change take effect.
Web User Interface
To configure web server type via web user interface:
1.
Click on
Network
->
Advanced
.
2.
Select the desired value from the pull-down list of
HTTP
.
3.
Enter the desired HTTP port in the
HTTP Port
field.
4.
Select the desired value from the pull-down list of
HTTPS
.