Yealink VC400, Руководство администратора

Страница: 211 / 299

Configuring System Settings
195
To configure far-end camera control feature via the remote control:
1.
Select
Menu
->
Video & Audio->Far-end Camera Control
.
2.
Make the desired changes.
3.
Press the
Save
soft key to accept the change.
Camera Control Protocol
VC400/VC120 video conferencing systems support camera control protocols: FECC (Far End
Camera Control). You can enable the FECC protocol for SIP call or H.323 call.
If far site wants to control the local camera, both the far site and near site should enable the
camera control protocol simultaneously. If the FECC protocol is not enabled on either site,
far-end camera control cannot be performed. For example, a SIP call is established between two
sites, the two sites must enable FECC (SIP) protocol simultaneously to perform far-end camera
control. If FECC (SIP) protocol and FECC (H.323) protocol are both enabled, the system will select
the appropriate camera control protocol according to the protocol (SIP or H.323) the call uses.
Camera control protocol parameters are described below:
Parameter Description Configuration Method
FECC(H.323)
Enables or disables the FECC (H.323) protocol
for far site to control near camera.
You can
configure it for the StarLeaf Cloud platform or
H.323 call separately.
Default:
Enabled
Web User Interface
FECC(SIP)
Enables or disables the FECC (SIP) protocol
for far site to control near camera. You can
configure it for the
Zoom/Pexip/BlueJeans/Mind/Custom
platform, SIP account or SIP IP call separately.
Default:
For Zoom/Pexip/BlueJeans/Mind/Custom
platform and SIP IP call, the default value is
Enabled.
For SIP account, the default value is Disabled.
Note:
You cannot configure it for the
Yealink/StarLeaf Cloud platform.
Web User Interface
To configure FECC(H.323) camera control protocol for StarLeaf Cloud platform via web
user interface:
1.
Click on
Account
->
Cloud
.
2.
Select
StarLeaf
from the pull-down list of
Platform Type
.