Yealink VC400, Руководство администратора

Страница: 142 / 299

Administrator’s Guide for Yealink Video Conferencing Systems
126
3.
Select the desired value from the pull-down list of
Transport
.
4.
Press the
Save
soft key to accept the change.
Configuring H.323 Settings
Yealink VC400/VC120 video conferencing systems support H.323 protocol. If your network uses
a gatekeeper, you can register an H.323 account for the system, and specify its H.323 name and
extension. This allows others to call the system by entering the H.323 name or extension instead
of the IP address.
SIP settings parameters on the system are described below:
Parameter Description Configuration Method
H.323 Protocol
Enables or disables the H.323
protocol.
Default:
Enabled.
Note:
Only when it is set to Enabled,
can H.323 account be registered.
When it is set to Enabled on both
sites, the VC400/VC120 can call the
far site by dialing an IP address
directly.
Remote Control
Web User Interface
H.323 Account
Enables or disables the H.323
account.
Default:
Enabled
If it is set to disabled, the system
cannot place or receive calls with the
H.323 protocol.
Remote Control
Web User Interface
H.323 Name
Specifies the name that gatekeepers
and gateways use to identify this
system. You can make point-to-point
calls using
H.323 names if both system are
registered to a gatekeeper.
Default:
blank
Remote Control
Web User Interface
H.323 Extension
Specifies the extension that
gatekeepers and gateways use to
identify this system.
Default:
blank
Note:
Users can place point-to-point
calls using the extension if both
Remote Control
Web User Interface