The Label and Display Name fields will be your Ext information. It will look like this when completed:
After you have it looking like this, press the confirm button. The device will then attempt to register.
Now your device is registered! However, there is a little more configuration that needs to be completed:
Navigate to Accounts > Advanced and make these changes:
- Keep Alive Type = Default
- UDP Keep Alive Interval (seconds) = 30
- DTMF Type = RFC2833 or SIP INFO
- DTMF Payload = 101
- 100 Reliable Retransmission = Enabled
- Local SIP Port: This needs to be set to 6xxx (Where xxx is equal to your Ext #) in this example we are
configuring Ext 323 so we are setting the Local SIP Port to 6323. This allows each phone to use its own
port and prevent call failures related to multiple requests for the same port.
- Caller ID Source: Set this to RPID-PAI-FROM
- Subscribe MWI To Voice Mail: Enabled
-Voice Mail: Set this to the extension number
-Voice Mail Display: set to “ON”
Содержание T58
Страница 3: ......
