Yealink T5 Series, Руководство пользователя

Страница: 184 / 229

User Guide for T5 Series IP Phones
172
2.
You can do the following:

Press
Hold
to place the current multicast RTP session on hold.
The sender’s phone places the multicast RTP session on hold and receiver’s phone
releases the session.
To resume the held multicast RTP session, press
Resume
.
The multicast RTP session is re-established.

Press
End Call
to end the multicast RTP session.
Note
Sending RTP Stream via a Paging List Key
Procedure:
1.
Press the paging list key when the phone is idle.
2.
Select a desired paging group.
3.
Press
Paging
to send RTP.
4.
Your can do the following:

Press
Hold
to place the current multicast RTP session on hold.
The sender’s phone places the multicast RTP session on hold and receiver’s phone
releases the session.
To resume the held multicast RTP session, press
Resume
.
The multicast RTP session is re-established.

Press
End Call
to end the multicast RTP session.
Automatic Call Distribution (ACD)
ACD is often used in offices for customer service, such as call center. The ACD system handles
large volumes of incoming calls from callers who have no need to talk to a specific person but
who require assistance from any of multiple persons at the earliest opportunity. ACD on the
SIP-T46S/T46G IP phone allows the ACD system to distribute large volumes of incoming calls to
the registered ACD users. To use this feature, you should configure an ACD key in advance. For
more information on ACD key LED indicators, refer to
LED Instructions .
Note ACD is not available by default. Check with your system administrator to find out if this feature is
available on your phone.
Multicast RTP is one way only from the sender to the multicast address(es) (receiver). For
outgoing RTP multicasts, all other existing calls on the phone will be placed on hold.