Yealink T3 Series IP Phones User Guide
46
LED Status
Icons
Description
T33P/T33G
Fast-flashing
red
The monitored line is ringing.
The monitored line is dialing.
Solid red
The monitored line is busy or in a call.
Slowly-flashing
red
The monitored line places a call on hold.
A call is parked to the monitored line.
Off
Monitored line fails to register or does not exist.
Audio Alert for BLF Pickup
The Audio Alert for BLF Pickup feature allows your phone to play a tone when the specified monitored line receives
an incoming call.
Setting an Alert Tone for Monitored Lines
You can set the alert ring type for the monitored lines to make it easier to recognize.
Before You Begin
Check with your system administrator to find out if the Audio Alert for BLF Pickup feature is available.
Procedure
1.
Go to
Menu
>
Settings
>
Basic Settings
>
Sound
>
BLF Ring Type
.
On the T33P/T33G phones, go to
Menu
>
Basic
>
Sound
>
BLF Ring Type
.
2.
Select the desired ring tone.
3.
Select
Save
.
Visual Alert for BLF Pickup
Your system administrator can configure your phone to display the call information when the specified monitored
line receives an incoming call.
You can select to pick up the call to the monitored line, place a call to the monitored line, place a new call or go
back to the idle screen.
Note
: If you press
Cancel
to go back to the idle screen, you can long press the BLF key to enter the Calls for Pickup screen
again.
Setting a BLF Key
You can set a BLF key to monitor a specific line for status changes on the phone.