Yealink T3 Series IP Phones User Guide
23
Answering a Call When in a Call
You can answer a call when there is already an active call on your phone.
When you are in an active call and an incoming call arrives on the phone, a call waiting tone beeps, and the incom-
ing call information is displayed.
Procedure
1.
Select
Answer
.
The active call is placed on hold, and the incoming call becomes active.
Note
: You can disable the call waiting feature to reject the incoming call automatically during a call.
Related Topic
Answering a Call Automatically
Auto answer enables you to automatically answer an incoming call in speakerphone (hands-free) mode when your
phone is idle.
Note
: When you are in an active call and an incoming call arrives on the phone, the incoming call will not be automatically
answered even if the auto answer is enabled.
Your system administrator can configure the phone to automatically answer the incoming call after ending all calls.
Procedure
1.
Go to
Menu
>
Features
>
Auto Answer
.
2.
Select the desired line (not supported on the T30P/T30 phones).
3.
Select
Enabled
from the
Status
field.
4.
Select
Save
.
If the auto answer feature is enabled for the default account, the auto answer icon appears on the phone
screen.
Switching Among the Handset, Speakerphone and Headset
Modes
You can select the desired mode before placing a call or can alternate among Speakerphone, headset, and hand-
set modes during a call.
Procedure
1.
During the call, pick up the handset, press the Speakerphone key , or press the HEADSET key.
For example, if you're using the handset, press the HEADSET key to switch to the headset, or press the Speak-
erphone key to switch to the speakerphone.
Note
: Your system administrator can disable you to use the handset, speakerphone (Hands-free) or headset mode.
Disabling Call Waiting
If the call waiting feature is disabled, when there is already a call, the new incoming call will be rejected auto-
matically.
Before You Begin
Check with your system administrator if the call waiting off code is required. If required, get it from your system
administrator.