Yealink SIP-T21 E2 Скачать руководство пользователя

Страница: 46 / 156

User Guide for the SIP-T21(P) E2 IP Phone

To edit a contact in the local directory:

Press the Dir soft key.

The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.

If Local Directory is removed from the directory, press Menu->Directory->Local
Directory to enter the local directory.

Select the desired contact group and then press the Enter soft key.

Press or to highlight the desired contact.

Press the Option soft key, and then select Detail.

Press or to highlight the contact information and then edit.

Press the Save soft key to accept change or the Back soft key to cancel.

To delete a contact from the local directory:

Press the Dir soft key.

The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.

If Local Directory is removed from the directory, press Menu->Directory->Local
Directory to enter the local directory.

Содержание SIP-T21 E2





























































































































































Результаты поиска

Содержание SIP-T21 E2

Отзывы:

Похожие инструкции для SIP-T21 E2

Бренды по названию

Популярные бренды

Yealink SIP-T21 E2, Руководство пользователя

Результаты поиска

Содержание SIP-T21 E2

Отзывы:

Похожие инструкции для SIP-T21 E2

Бренды по названию

Популярные бренды