YATO YG-05252, Инструкция по эксплуатации

Страница: 11 / 108

11
O R I G I N A L I N S T R U C T I O N S
EN
PRODUCT CHARACTERISTICS
Refrigerated prep table is used for storing foodstu ff s in refrigerating conditions. Depending on the intended use de fi ned by op-
erating temperature range, the product can be used for storing refrigerated products or for freezing them and further storage
under this condition. Possibility of cooling down the table top also allows preparing products in refrigerated conditions. Thanks to
electronically controlled process of maintaining the temperature, device operation is e ffi cient and does not require intervention of
maintenance crew. Correct, reliable and safe operation of the product depends on proper operation, therefore:
Before starting product operation, please read this manual and keep it.
The supplier does not assume any liability for any damages resulting from misuse of the product, failure to follow safety regula-
tions and recommendations speci fi ed in this manual. Misuse of the product will also result in loss of guarantee and warranty rights
of the user.
EQUIPMENT
The product is delivered complete and does not require assembly. Therefore, before using the product, it is required to remove
all packing and protection elements for transportation. Some preparatory actions described in the further part of this manual are
also required.
GENERAL USE RECOMMENDATIONS
Product is designed for professional use and should be operated by properly quali fi ed per-
sonnel. The product is intended only for storing refrigerated foodstu ff s. It is forbidden to
store other products than foodstu ff s. In particular, do not store explosive substances in the
product, such as aerosol cans containing fl ammable gas or other fl ammable and explosive
substances. The product is also not intended for storing medical products, blood and its
components. There is a fl ammable substance in the refrigerant system, which due to the
contained nature of refrigerating medium circuit does not pose a direct threat to the user,
but the following warnings must be adhered to.WARNING! Do not block vents in product
housing or in the embedded structure.WARNING! In order to accelerate the defrosting pro-
cess, do not use any mechanical means or other means than those recommended by the
manufacturer. WARNING! Protect the refrigeration system from any damage.WARNING!
Do not use any other type of electrical equipment inside the food storage compartment than
the one recommended by the manufacturer. Unattended repair, disassembly or modi fi cation
of refrigerant system is forbidden.This product is not intended for use by children below 8
years of age and persons with reduced physical or mental capabilities and person with no
experience or knowledge of the equipment. Unless they are supervised or trained how to
use the product in a safe manner so that the risks involved are understood. Children should
not play with the product. Unattended children should not perform cleaning and maintenance
of the equipment.
Recommendations for the product transportation and installation
NOTE! Product installation and connections can be done only by quali fi ed personnel. The
product should only be transported in operating position. If it is necessary to tilt the product
during transport or installation, do not exceed an angle of 45 degrees. Regardless of trans-
port and assembly methods, wait at least 12 hours between placing the product in target lo-
cation and its connection to power supply. This period of time is required to stabilize operating
fl uids inside the product systems. Failure to observe this precaution leads to product dam-