manualshive.com logo in svg

YASKAWA SI-EP3, Техническое руководство

Поделиться
Скачать
YASKAWA SI-EP3 Скачать руководство пользователя страница 5

1  Preface and Safety

YASKAWA ELECTRIC

 SIEP C730600 89C YASKAWA AC Drive Option SI-EP3 Technical Manual

 5

Terms

Registered Trademarks

• PROFINET is a registered trademark of PROFIBUS and PROFINET International (PI).
• Trademarks are the property of their respective owners.

Supplemental Safety Information

Read and understand this manual before installing, operating, or servicing this option. Install the option according to this 
manual and local codes.

The following conventions indicate safety messages in this manual. Failure to heed these messages could cause fatal 
injury or damage products and related equipment and systems.

Note:

Indicates supplemental information that is not related to safety messages.

Option:

YASKAWA AC Drive Option SI-EP3 PROFINET

Drive: 

• YASKAWA AC Drive 1000-Series (A1000, U1000, U1000L, Z1000U)
• YASKAWA AC Drive GA700
• YASKAWA AC Drive GA800

Keypad: 

• LCD Operator for YASKAWA AC Drive 1000-Series
• LED Operator for YASKAWA AC Drive 1000-Series
• LCD Keypad for YASKAWA AC Drive GA700 and GA800
• LED Keypad for YASKAWA AC Drive GA700 and GA800

V/f: 

V/f Control

CLV: 

Closed Loop Vector Control 

OLV/PM: 

Open Loop Vector Control for PM

AOLV/PM: 

Advanced Open Loop Vector Control for PM

CLV/PM: 

Closed Loop Vector Control for PM

H: 

Indicates an engineering unit for hexadecimal number format.

DANGER 

Indicates a hazardous situation, which, if not avoided, will cause death or serious injury

.

W ARNING 

Indicates a hazardous situation, which, if not avoided, could cause death or serious injury. 

CAUTION 

Indicates a hazardous situation, which, if not avoided, could cause minor or moderate injury. 

NOTICE

Indicates an equipment damage message.

Содержание SI-EP3



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды