manualshive.com logo in svg

YASKAWA SI-EP3, Техническое руководство

Поделиться
Скачать
YASKAWA SI-EP3 Скачать руководство пользователя страница 19

5  Installation Procedure

YASKAWA ELECTRIC

 SIEP C730600 89C YASKAWA AC Drive Option SI-EP3 Technical Manual

 19

Install the Option 

Remove the front cover of the drive before you install the option.
Refer to the drive manual for information about how to remove the front cover. Different drive sizes have different cover 
removal procedures.
You can only install this option into the 

CN5-A

 connector on the drive control board.

DANGER!

Electrical Shock Hazard. Do not inspect, connect, or disconnect any wiring while the drive is energized. Failure to comply 

will cause death or serious injury. Before servicing, disconnect all power to the equipment and wait for at least the time specified on the 

warning label. The internal capacitor remains charged even after the drive is de-energized. The charge indicator LED will extinguish 

when the DC bus voltage is below 50 Vdc. When all indicators are OFF, measure for unsafe voltages to confirm the drive is safe.

1.

Affix the LED label (E) in the appropriate position on the drive front cover (D).

Figure 11  

Figure 11  Affix the LED Label

2.

Shut off power to the drive, wait the appropriate amount of time for voltage to dissipate, then remove the front 
cover (D). 
Refer to the manual packaged with the drive for details on cover removal.

NOTICE:

Damage to Equipment. Observe proper electrostatic discharge (ESD) procedures when handling the option, drive, and 

circuit boards. Failure to comply could cause ESD damage to circuitry.

Figure 12  

Figure 12  Remove the Front Cover and Keypad

D

E

A1000

Keypad connector 

Keypad connector tab

Move the keypad connector to the holder on the 
drive after removing the keypad and before removing 
the front cover. Insert the keypad connector tab into 
the holder when installing the keypad connector to 
the holder.

Holder

A1000

Содержание SI-EP3



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды