7 Procedure B
YASKAWA
TOEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Installation Manual
39
12.
Attach the option unit to the drive by aligning the two mounting tabs on left and right
side of the option with slots on the drive. Plug-in the CN5 connector on the back of
the option unit into the CN5 connector on the drive. Tighten the screw in the front of
the option unit.
Figure 36
Figure 36 Attach Option Unit to Drive
13.
Insert the LED operator cable from the front cover into port CN1 on the drive.
Figure 37
Figure 37 Insert LED Operator Cable to Drive CN1 Port
CN5 Connector
port on drive
CN5 Connector
(underside of option)
Mounting Tab
Drive
CN1 Port
Inside front cover
Insert LED
operator cable
