YASKAWA
SIEP C730600 0E YAI Modbus TCP/IP Technical Manual
15
A - Drive front cover
B - Keypad
C - Drive terminal cover
Figure 5.7 Replace the Front Cover, Terminal Cover, and Keypad
8.
Set drive parameters in
Related Drive Parameters on page 27
for correct option performance.
■
Procedure B
This section shows the procedure to install and wire the option on a Z1000 drive.
Prepare the Drive for the Option
Correctly wire the drive as specified by the manual packaged with the drive. Make sure that the drive functions
correctly. Refer to the drive manuals for more information.
A - Drive grounding terminal (FE)
B - Option
C - Included screws
D - Drive front cover
E - Keypad
F - LED label
G - Ground wire
H - Option modular connector CN1 port 1 (RJ45)
I - Option modular connector CN1 port 2 (RJ45)
J - Insertion point for CN5 connector
K - Connector CN5
Figure 5.8 Drive Components with Option
Install the Option
Use this procedure to install the option.
