YASKAWA
SIEP C730600 0E YAI Modbus TCP/IP Technical Manual
47
Figure 8.6 Chart Page View
◆
Email Alerts Page
The Email Alerts page allows the user to configure four Email Fault/Alarm conditions. When the condition is true,
one email will be sent to the provided email address. Another email will not be sent until the condition becomes
false and then true again.
A 30-second timer prevents emails from being sent when conditions reoccur immediately after being removed.
The timer helps limit the amount of emails sent regarding the same intermittent condition and helps to reduce
network traffic by reducing emails about reoccurring errors. The timer helps limit the amount of emails sent
regarding the same intermittent condition and helps to reduce network traffic by reducing emails about
reoccurring errors.
To save the entered information into the option, click [Save Email Settings].
Figure 8.7 Email Alerts Page View
Procedure: Conditional Email Set-up
1. Click the [Enable] check box to enable the alert.
2. Define the condition that will trigger the email by selecting a monitor parameter, a comparator, and a value.
Set up comparator values for the range of values to check in the chosen condition. If choosing only one
condition and no OR or AND are needed, set the [OR/AND] drop-down selection to [NotUsed].
3. Enter the email address where the alert will be sent.
4. Enter the message that will appear in the email contents.
