YASKAWA SI-C3/V, Техническое руководство, Страница: 8 / 39

3 Receiving
YASKAWA ELECTRIC SIEP C730600 22C V1000 Option CC-Link Technical Manual 9
3 Receiving
Please perform the following tasks after receiving the CC-Link Option:
• Inspect the CC-Link Option for damage.
If the CC-Link Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the nameplate (see Figure 2 ).
• If you have received the wrong model or the CC-Link Option does not function properly, contact your supplier.
 Contents and Packaging
Table 2 Contents of Package
 Tool Requirements
Note: Tools required to prepare CC-Link cables for wiring are not listed in this manual.
Description: Option unit Ground Cables Warning Label Stickers Installation Manual
–
Quantity:
1 4 1 1
A Phillips screwdriver (M3, M3.5 to M6
<1>
) metric or (#1, #2
<1>
) U.S. standard size is required to install the CC-Link Option.
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
MA N UA L
SIEP_C730600_22C_3_0.book 9 ページ ２０２２年８月２３日 火曜日 午後１時４分