5 Installation Procedure
16
YASKAWA ELECTRIC
SIEP C730600 22C V1000 Option CC-Link Technical Manual
5.
Connect the CC-Link Option to the drive.
Properly secure the tabs on the left and right sides of the CC-Link Option to the drive case.
Figure 12
Figure 12 Attach CC-Link Option
6.
Connect the ground cable from the drive ground terminal to the CC-Link Option ground.
When wiring the CC-Link Option, pass the ground cable through the inside of the drive bottom cover, then pass the ground cable into the
through-hole at the front of the CC-Link Option.
Figure 13
Figure 13 Ground Cable Connection
7.
Connect the communications cable to the terminal block. Refer to Procedure on page
8.
Attach the CC-Link Option cover to the front of the CC-Link Option.
Figure 14
Figure 14 Attach Cover
Note:
When using the drive in an area that may require displaying warning information in Japanese or Chinese, a sticker has been provided with the CC-Link Option. This
sticker can be placed over the English and French warnings on the front of the CC-Link Option.
tabs should line up
tabs should line up
ground
cable
drive ground terminal
Pass the ground cable through
the bottom cover of the drive.
through-hole
for ground cable
ground cable
tabs should line up
SIEP_C730600_22C_3_0.book 16 ページ ２０２２年８月２３日 火曜日 午後１時４分