YASKAWA SI-C3/V, Техническое руководство, Страница: 9 / 39

10 YASKAWA ELECTRIC SIEP C730600 22C V1000 Option CC-Link Technical Manual
4 CC-Link Option Components
4 CC-Link Option Components

CC-Link Option
Figure 2
Figure 2 Option Unit
Note: For details on the LEDs, Refer to CC-Link Option LED Display on page 11 and Fault LED Display on CC-Link Option Side on page 26 .
 Dimensions
The installed CC-Link Option adds 27 mm to the total depth of the drive.
Figure 3
Figure 3 Dimensions
 Terminal Block
Table 3 Terminal Descriptions
Figure 4
Figure 4 CC-Link Option Terminal Block
A – LED (SD) I – Function Earth cable connection (FE)
B – LED (RD) J – Mounting clip
<1> Cables are not connected to the CC-Link Option and are packaged separately in the box.
<2> The grounding method switch (S1) is only available for CC-Link Options REV.B and later. Check the REV version printed on the nameplate of
your CC-Link Option.
C – Option cover K – Ground Cable
<1>
D – LED (L.ERR) L – Through-hole for cable
E – LED (L.RUN) M – Terminal block
F – CC-Link PCB N – Option connector
G – Attachment screw hole for option cover O – Grounding method switch (S1)
<2>
H – Nameplate
Terminal Name Description
1 DA
Comm. Data +
2 DB
Comm. Data –
3 DG
Signal Ground
4 SLD
Shield
5 SLD
Shield
L.RUN
L.ERR
SD
RD
A E
D B
C
CC-Link with cover attached
FE
CC-Link with cover removed
underside
N
J
H
G
F
J
K
O
I
L M
27 mm
Front View
(looking from the front of the CC-Link Option)
DA DB DG SLD SLD
Bottom View
SIEP_C730600_22C_3_0.book 10 ページ ２０２２年８月２３日 火曜日 午後１時４分