manualshive.com logo in svg

YASKAWA Motoman WorldLite-50, Системное руководство

Поделиться
Скачать
YASKAWA Motoman WorldLite-50 Скачать руководство пользователя страница 41

OPERATION

MOTO

MAN

5-5

Arc-WorldLite 50 System Manual

5.3.3

Shock Sensor Recovery

The ArcWorld welding package includes a Motoman gun mount. This mount is
designed to protect the torch from damage in case of a crash. A slight deflection of
the torch activates a SHOCK SENSOR message, which triggers an E-STOP
condition. To clear the E-STOP condition, you must override the shock sensor and
move the robot clear of the impact. To override the shock sensor, proceed as
follows:

CAUTION!

It is possible to crash the robot with the Shock Sensor Override
Switch left in the “Override” position. Always remember to
reactivate the Shock Sensor before continuing system operation.

1. Press TOP MENU on programming pendant.
2. Select ROBOT icon using cursor keys and press SELECT.
3. Cursor to OVERRUN-S.SENSOR and press SELECT key.
4. Select RELEASE to release shock sensor.
5. Turn servo power ON by holding ENABLE switch on the programming

pendant and pressing SERVO ON.

NOTE:

TEACH LOCK must be ON to turn servo power on in TEACH mode.

6. Move manipulator clear of impact position.

The Arc-WorldLite 50 cell is now ready to continue operation.

Содержание Motoman WorldLite-50















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды