36
YASKAWA
SIEP C730600 0MA BACnet/IP Technical Manual
◆
Network Page
The Network page shows the status of the option network traffic and the status of open I/O connections.
Figure 8.3 Network Page View
Table 8.1 Network Monitor Descriptions
Name
Description
Address Mode
Either static IP address or DHCP.
Alignment Errors
Cumulative number of errors for uneven packets lengths.
Auto-Negotiation
If auto-negotiation is enabled, this will show the status of the negotiation.
Collisions
Cumulative number of collisions (half duplex only) reported by the MAC/PHY (Media Access Control/Physical
Layer).
Current Connections
Current number of open connections.
Deferred Collisions
Cumulative number of deferred collisions.
Duplex
Display either Full or Half.
Excessive Collisions
Cumulative number of excessive collisions.
FCS Errors
Cumulative number of frame check sequence errors.
Frame Too Large
Cumulative number of frames that exceed the maximum frame size.
Gateway Address
The Gateway IP Address that the option will use.
In NUcast Packets
Cumulative number of non-unicast packets received.
In Octets
Cumulative number of incoming octets.
In Ucast Packets
Cumulative number of unicast packets received.
IP Address
IP Address of the option.
Late Collisions
Cumulative number of late collisions.
Link Status
Active if the cable is plugged in, or inactive if no cable.
MAC Address
MAC Address of the option.
Msg Rx Dropped
Cumulative number of messages dropped due to input network buffer being full and unable to hold the new message.
Msg Rx Errors
Cumulative number of receive errors reported by the MAC/PHY (Media Access Control/Physical Layer).
