YASKAWA JOHB-SMP3, Техническое руководство

Страница: 25 / 50

7 BACnet/IP Objects Supported
YASKAWA SIEP C730600 0MA BACnet/IP Technical Manual 25
Object ID
Object Name
(Network Display, if Different)
Modbus Register (Hex.) Range Unit PV Access
(Drv Anlg In 3 Level)
AI4
*2
Bypass Analog Input 1 Level
(Byp Anlg In 1 Level)
8795 0 - 100.0 % R
AI6 Display Format o1-03 0502 0 - 65535 - R
AI7 Scale Format b5-20 01E2 0 - 65535 - R
AI8 Inverter Model o2-04 0508 0 - 65535 - R
AI9 Rated Current n9-01 05D0
0 - 6553.5 (for drives
rated higher than 11
kVA)
0 - 655.35 (for drives
rated 11 kVA or lower)
A R
AI10
*2
Motor Current UB-01 8780 0 - 655.35 A R
AI11
*2
Contactor Voltage 8790 0 - 65535 V R
*1 Not available on all drives. Refer to the Technical Manual of your drive, and check if the Modbus register of the applicable object
exists.
*2 Available on bypasses only.
◆
Analog Output Objects
Object ID
Object Name
(Network Display, if Different)
Modbus Register (Hex.) Range Unit PV Access
AO1
Drive Analog Output 1 Level
Drive Terminal FM
(set H4-01 = 0)
(Drv Anlg Out1 Level)
0007 0 - 100.0 % C
AO2
*1
Drive Analog Output 2 Level
Drive Terminal AM
(set H4-01 = 0)
(Drv Anlg Out2 Level)
0008 0 - 100.0 % C
*1 Not available on all drives. Refer to the Technical Manual of your drive, and check if the Modbus register of the applicable object
exists.
◆
Analog Value Objects
Object ID
Object Name
(Network Display, if Different)
Modbus Register (Hex.) Range Unit PV Access
AV1
*1
Drive Operation Command
(Operation Cmd)
0001 0 - 65535 Bitmap C
AV2 Frequency Cmd 0002 0 - 600.00 Determined by o1-03 C
AV3 PI Setpoint Cmd 0006 0 - 100.00 % C
AV4
Drive Multi-Function Output Command
(MF Output Cmd)
• Bit 0: Multi-FunctionDigital Output 1
(terminal M1-M2)
•
Bit 1: Multi-FunctionDigital Output 2
(terminal M3-M4)
• Bit 2: Multi-Function Digital Output 3
(terminal M5-M6)
(Z1000U: MD-ME-MF)
• Bit 3: Reserved
• Bit 4: Reserved
• Bit 5: Reserved
• Bit 6: Enables the function in bit 7
• Bit 7: Fault Contact Output (terminal
MA-MB-MC)
•
Bit 8 to F: Reserved
Note:
When using AV4, do not use BO1 to
BO3 or BV12.
0009 0 - 255 Bitmap C
AV5
Drive Reference Select Command
(Reference Select Cmd)
• Bit 0: Reserved
• Bit 1: PID Setpoint Input
000F 0 - 32767 Bitmap C