manualshive.com logo in svg

YASKAWA JEPMC-PSA3012-E, Руководство пользователя

Поделиться
Скачать
YASKAWA JEPMC-PSA3012-E Скачать руководство пользователя страница 27

1.3  Devices and Components That Are Required to Build a System

1-9

1

Introduction

1.3

Devices and Components That Are Required to Build a System

The following table lists the devices and components that are required to build the system that is shown in 

1.2 System Configuration Example (page 1-8)

. The numbers 1 to 13 correspond to the numbers in the fig-

ure in 

1.2 System Configuration Example (page 1-8)

.

No.

Name

Use

Model

Remarks

MP3200

Power Supply 
Unit

Supplies the power that is 
needed for the operation 
of the Units that are con-
nected to each other and 
to any Optional Modules 
that are connected in the 
Controller.

Refer to the following section for details.

 MP3200 Unit List (page 1-11)

CPU Unit

Stores the module defini-
tions and programs, and 
interprets the programs. 
The CPU Unit also con-
trols the Optional Mod-
ules.

Base Unit

Used to mount Optional 
Modules.

Rack Expansion 
Interface Unit

Used to expand a Rack.

Ethernet communica-
tions cables

Used to connect the CPU 
Unit to Ethernet commu-
nications devices or to 
connect the CPU Unit to 
a PC that has the 
MPE720 installed on it.

Use a commercially available cable that meets the following condi-
tions:
• Ethernet specification: 100Base-TX
• Category 5 or higher
• Twisted-pair cable with RJ-45 connectors

Use a cross cable that meets the above conditions to connect the Main 
CPU Unit to a Sub CPU Unit or to connect two Sub CPU Units.

Battery with Special 
Connector

Provides power for the 
calendar and backup 
memory while the power 
is turned OFF.

JEPMC-OP3005

The Battery is provided with the CPU Unit.

Power supply cable

Connects the Power Sup-
ply Unit to a 24-VDC 
power supply or an AC 
power supply.

Use a commercially available cable that meets the following condi-
tions:
• Wire size: AWG18 to AWG13 (0.8 to 2.6 mm

2

)

• Twisted-pair cable

RLYOUT connector 
cable

Connects the Power Sup-
ply Unit to a 24-VDC 
power supply, an AC 
power supply, or a status 
monitoring device.

Use a commercially available cable that meets the following condi-
tions:
• Wire size: AWG28 to AWG14 (0.08 to 2.0 mm

2

)

Front cover for 
unused slot

Used to cover unused 
slots on the Base Unit.

JEPMC-OP2300

−

Optional Modules

Motion Modules, I/O 
Modules, and Communi-
cations Modules are 
selected based on the 
application.

Refer to the following section for details.

 Optional Modules (page 1-12)

Continued on next page.

Содержание JEPMC-PSA3012-E


























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды