manualshive.com logo in svg

YASKAWA CM092, Техническое руководство, Страница: 15 / 82

Поделиться
Скачать
YASKAWA CM092 Скачать руководство пользователя страница 15

Installation 1-10

Network and Web Access Configuration

‹

Connect to the EtherNet/IP Option Card

Note: 

Due to the presence of high voltage in the area of the network connection, insulating the RJ-45 M-F cable connection is required.

1.

Prior to connecting the RJ-45 M-F network cable, slide the supplied insulated tubing (4"x1") over the female end of the supplied RJ-45 
M-F cable.
1.1 

Direct connection:

 To connect directly to the 

EtherNet/IP Option Card

, plug one end of a CAT-5 EtherNet/IP crossover cable 

into the RJ-45 socket on the supplied RJ-45 M-F cable. Connect the other end to the RJ-45 EtherNet/IP socket on the configura-
tion device, typically a controller, laptop or other PC.

1.2 

Connection through hub or switch:

 To connect through a switch, hub or router, connect the RJ-45 socket on the RJ-45 M-F 

cable to the switch, hub or router using a standard CAT-5 patch cable. 

2.

After the network connection is made, slide the insulated tubing (4"x1") over the connection and secure it in place using the supplied 
cable ties.

‹

Configure the EtherNet/IP Network

1.

The default configuration option for the

 EtherNet/IP Option Card

 is DHCP (Dynamic Host Configuration Protocol). Thus there must be 

a DHCP Server connected to the network in order to have the IP address of the 

EtherNet/IP Option Card

 set. For detailed information 

on how to setup the Rockwell BOOTP/DHCP Server on a PC refer to the appropriate Rockwell document or Yaskawa's Application 
Note AN.AFD.10.

2.

If the network configuration requires that devices have a static IP address, the 

EtherNet/IP Option Card's 

configuration can be changed 

to USER and the appropriate static IP address can be entered via the 

EtherNet/IP Option Card's

 web pages as shown below.

Note that the 

EtherNet/IP Option Card

 must first have been assigned an IP address via DHCP before its configuration can be changed.

Содержание CM092



















































































Отзывы:

Нет отзывов