Yardworks CLM48CU Скачать руководство пользователя страница 7

model no. 060-1980-6  |  contact us: 1.866.523.5218

model no. 060-1980-6  |  contact us: 1.866.523.5218

7

model no. 060-1980-6  |  contact us: 1.866.523.5218

use.

e)  Do not subject battery pack to 

mechanical shock.

f)   In the event of battery leaking, do not 

allow the liquid to come in contact 

with the skin or eyes. If contact has 

been made, wash the affected area 

with copious amounts of water and 

seek medical advice.

g)  Observe the plus (+) and minus 

(–) marks on the battery pack and 

equipment and ensure correct use.

h)  Do not use any battery pack which 

is not designed for use with the 

equipment.

i)   Keep battery pack out of the reach of 

children.

j)   Seek medical advice immediately if a 

cell or battery has been swallowed.

k)  Always purchase the battery 

pack recommended by the device 

manufacturer for the equipment.

l)   Keep battery pack clean and dry.
m) Wipe the battery pack terminals with a 

clean dry cloth if they become dirty.

n)  Battery pack needs to be charged 

before use. Always use the 

correct charger and refer to the 

manufacturer’s instructions or 

equipment manual for proper charging 

instructions.

o)  Do not leave battery pack on 

prolonged charge when not in use.

p)  After extended periods of storage, 

it may be necessary to charge 

and discharge the battery pack 

several times to obtain maximum 

performance.

q)  Battery pack gives its best performance 

when it is operated at normal room 

temperature 20°C 

±

 5°C (68°F 

±

 9°F).

r)   When disposing of battery packs, 

keep battery packs of different 

electrochemical systems separate 

from each other.

s)  Recharge only with the charger 

specified by 

MANUFACTURER. Do 

not use any charger other than that 

specifically provided for use with the 

equipment. 

A charger that is suitable for 

one type of battery pack may create a 

risk of fire when used with another battery 

pack. 

t)   Retain the original product literature 

for future reference.

u)  Use only the battery pack in the 

application for which it was intended.

v)  Remove the battery pack from the 

equipment when not in use.

w)  Dispose of properly.

Safety Warnings for Walk-Behind Mowers
IMPORTANT
Safe Practices for Walk-Behind Mowers
I. GENERAL OPERATION   

1.   Read, understand, and follow all 

instructions on the machine and in the 

manual(s) before starting.   

2.   Do not put hands or feet near or under 

the machine. Keep clear of the discharge 

opening at all times.   

3.   Only allow responsible adults, who are 

familiar with the instructions, to operate 

this machine.   

4.   Clear the area of objects such as rocks, 

wire, toys, etc., which could be thrown by 

the blade. Stay behind the handle when 

the motor is running.   

5.   Be sure the area is clear of bystanders 

before operating. Stop machine if anyone 

enters the area.   

6.   Do not operate machine barefooted or 

while wearing sandals. Always wear 

proper footwear.

7.   Do not pull machine backward unless 

absolutely necessary. Always look down 

and behind before and while moving 

backward.   

8.   Never direct discharged material toward 

anyone. Avoid discharging material 

against a wall or obstruction. Material 

may ricochet back toward the operator. 

Stop the blade when crossing gravel 

surfaces.   

Safety Instructions

Содержание CLM48CU





































Отзывы: