manualshive.com logo in svg

Yardworks CLM48CU, Инструкция по эксплуатации

Поделиться
Скачать
Yardworks CLM48CU Скачать руководство пользователя страница 17

model no. 060-1980-6  |  contact us: 1.866.523.5218

model no. 060-1980-6  |  contact us: 1.866.523.5218

17

model no. 060-1980-6  |  contact us: 1.866.523.5218

Operation

 

WARNING: When battery charge runs out after continuous use or 

exposure to direct sunlight or heat, allow time for the tool to cool 

down before re-charging to achieve the full charge.  

1. CHARGING THE BATTERY PACK
IMPORTANT NOTES FOR CHARGING BATTERY

The battery in your new tool is not charged when it leaves the plant. Therefore it must be fully 

charged before using the first time. 

NOTE:

 If the battery pack is very hot you must remove your battery pack from the charger and 

allow your battery pack to cool first to ambient temperature and then recharging can be started.

To prevent damage to the battery pack, when charge runs out, please charge the battery to 
reach full or no less than half charge before storage.
If the tool will not be used for long periods of time, charge the battery every 3-6 months.  

CHARGING PROCEDURE (SEE FIG. E)

1) Plug the charger into an appropriate outlet. 

2) Slide the battery pack into the charger; the light will begin flashing green to indicate the 

charging process has started.
3) When charging is completed, the light will run solid green. The pack is now fully charged, 
unplug the charger and remove the battery pack.

E

16

15

Содержание CLM48CU





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды