Yardworks CLM48CU Скачать руководство пользователя страница 10

Страница: 10 / 36

model no. 060-1980-6 | contact us: 1.866.523.5218

Safety Instructions

on a thin nail through its centre hole.

The nail should also be in a horizontal

position. If either end of the blade rotates

downward, remove some metal from

the heavy or lower end until the blade

is balanced. It is balanced when neither

end drops.

SAVE THESE INSTRUCTIONS

Information for radiated emission

This device complies with Canadian ICES-

001.

This device complies with Part 15 of the FCC

Rules.

Operation is subject to the following two

conditions:

(1) This device may not cause harmful

interference, and

(2) This device must accept any interference

received, including interference that may

cause undesired operation.

NOTE: This equipment has been tested

and found to comply with the limits for a

Class B digital device, pursuant to Part 15

of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by

turning the equipment off and on, the user is

encouraged to try to correct the interference

by one or more of the following measures:
• Reorient or relocate the receiving

antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced

radio/TV technician for help.

WARNING:

Changes or modifications to this unit not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.

Содержание CLM48CU





































Результаты поиска

Содержание CLM48CU

Отзывы:

Бренды по названию

Популярные бренды

Yardworks CLM48CU, Инструкция по эксплуатации

Результаты поиска

Содержание CLM48CU

Отзывы:

Бренды по названию

Популярные бренды