Yardworks 060-3984-0, Руководство пользователя

Страница: 11 / 20

OPERATING INSTRUCTIONS
11
STARTING THE SNOW THROWER
Avoid accidental start-ups. Verify that the operator is in the starting position when using the snow
thrower. In order to avoid serious injury, the operator and unit must be in a stable position when
starting the Snow Thrower.
Follow this sequence exactly in order to start the Snow Thrower.
1. Verify that the Snow Thrower is plugged in.
2. Press and hold the lock-out button (Fig. 3).
3. While holding the lock-out button, press and hold the trigger switch.
NOTE: The Snow Thrower will not start if the lock-out button is not held until the trigger switch is
lifted.
4. Hold the handles and begin to use the Snow Thrower (Fig. 4).
STOPPING THE SNOW THROWER
1. Release the trigger switch.
2. The lock-out button will pop out, and the Snow Thrower will stop.
USING THE SNOW THROWER
1. Start the Snow Thrower by following the Starting instructions. The depth and weight of the
snow will determine the forward speed.
2. Push the Snow Thrower forward so that it rides on the scraper.
3. Verify that the power cord is attached to the cord retainer. The power cord should trail to the
side of the operator.
Lock-Out
Button
Trigger
Switch
Fig. 3 Fig. 4