background image

SAFETY RULES

6

• Keep clothing and body parts away from the rotor.

• Do not operate the motor at a faster speed than necessary. Do not run the motor at high speed 

while not clearing snow.

• Stop the motor when snow clearing is delayed or when moving from one location to another.

• Unplug the Snow Thrower when it is being transported and when it is not in use.

• After striking a foreign object, turn the Snow Thrower off and unplug it, and then inspect it for 

damage. Repair any damage before restarting and using the Snow Thrower.

• If the Snow Thrower starts to vibrate abnormally, stop the Snow Thrower immediately and attempt 

to determine the cause. Vibration is generally an indication of danger.

• Stop the motor and unplug the Snow Thrower whenever the operator is not in the operating 

position, before unclogging the impeller, and before making any repairs, adjustments, or inspec

-

tions.

• Do not discharge snow onto public roads or near moving traffic.

• Allow the Snow Thrower to run for a few minutes after clearing snow in order to prevent moving 

parts from freezing.

• Use only the manufacturer's original replacement parts and accessories for this Snow Thrower. 

The use of unauthorized parts or accessories could lead to serious injury to the user or damage

the Snow Thrower, and will void the warranty.

• Do not use the Snow Thrower in the hand held position. Do not pick up the Snow Thrower while it 

is plugged and running. The Snow Thrower is designed to travel along the ground.

GENERAL SAFETY RULES

• Verify that the Snow Thrower is secure while transporting.

• Store the Snow Thrower in a dry area, locked up or high enough to prevent unauthorized use or 

damage, and out of the reach of children.

• Do not douse or squirt the unit with water or any other liquid. Keep handles dry, clean, and free of 

debris. Clean the Snow Thrower after each use. See the section entitled Cleaning and Storage.

• If the labels on the Snow Thrower become defaced or start to lift off, contact the Toll-Free 

Helpline, at 1 866 523-5218

• Keep these instructions in a safe place for future reference. Refer to them often, and use them to 

instruct other users. Anyone who uses this Snow Thrower must read these instructions carefully.

• Maintain the Snow Thrower with care. Follow the instructions for lubricating and changing 

accessories.

Содержание 060-3984-0





















Отзывы: