TROUBLESHOOTING
17
THE SNOW THROWER DOES NOT START
THE MOTOR IS ON, BUT THE ROTOR DOES NOT TURN
CAUSE
SOLUTION
The Snow Thrower is unplugged.
The lock-out button or trigger switch were
not used properly.
The overload protection switch has popped
out.
Verify that the Snow Thrower is plugged into an
electrical outlet.
Press and hold the lock-out button, and then lift
and hold the trigger switch (see the section
entitled Starting the Snow Thrower).
See the section entitled Overload Protection
Switch.
CAUSE
SOLUTION
THE SNOW THROWER LEAVES A THIN LAYER OF SNOW BEHIND
CAUSE
SOLUTION
The belt is damaged.
Replace the belt (see the section entitled
Inspecting/Replacing the Drive Belt).
The scraper is worn.
Replace the scraper (see the section entitled
Replacing the Scraper).
If further assistance is required, contact the Toll-Free Helpline, at 1-866-523-5218.
Содержание 060-3984-0
Страница 19: ...EXPLODED VIEW 19...
