Yardworks 060-3984-0, Руководство пользователя

Страница: 13 / 20

MAINTENANCE
13
REPLACING THE SCRAPER
Use only the manufacturer's original replacement parts.
1. Place the Snow Thrower on the ground or on a work bench. Position the Snow Thrower so that
the impeller is facing up.
2. Remove the three (3) screws that are located beneath the impeller that secure the scraper to
the housing using a phillips screwdriver. (Fig. 7).
3. Remove the scraper, and discard it in the proper manner.
4. Snap the new scraper into position, and attach it to the Snow Thrower by reinstalling the three
(3) screws.
Fig. 7
WARNING:
In order to avoid serious personal injury, turn the Snow Thrower off and
unplug it before performing any maintenance.