Yardworks 060-3984-0, Руководство пользователя

Страница: 15 / 20

MAINTENANCE
15
13 14 15
16 17 18
19 20 21
impellor shaft
washer and nut
spring
spring
13. Place the pulley back onto
the impellor shaft.
14. Be sure to route the belt
correctly, as shown.
15. Replace the 2 spacer
washers on the impellor shaft.
16. Replace the pulley
support plate and the 3
retaining screws.
17. Replace and tighten the
impellor shaft washer and nut.
18. Place the upper spring
into position and then finger
tighten the cover plate into
place as shown.
19. Place the lower spring into
position and slide the side
cover up using slight pressure
to hold the spring in place.
20. Replace and tighten the
remaining screws and the nut
and washer.
21. Re-install the impellor
shaft nut and washer on the
right hand side, and tighten.