Yardline RIDGEMOOR GABLE 10 x 12, Руководство пользователя

Страница: 13 / 83

11
DOOR
96"
(243,8 cm)
144"
(365,8 cm)
6"
(15,2 cm)
12"
(30,5 cm)
Move to the opposite side. Using the long edge of the panel as a lever, move the
panel side-to-side until the top corner is flush to the floor frame (Fig. B)
.
Secure panel with two 2" nails in the corners.
2
BEGIN
1
3
4
Continue attaching the panel using 2" nails 6" apart on edges and 12" apart inside panel.
Use a chalk line or use pre-painted grid lines to nail into joists under panel.
Ensure your floor frame is square by installing one panel
and squaring frame.
Fig. C
Check the floor frame is square by measuring diagonally across the frame corners. If the measurements are the
same your floor frame is square. The measurement will be approximately
187-7/16" (476,1 cm)
(Fig. C)
.
PARTS REQUIRED:
x1
5/8 x 48 x 96"
(1,6 x 121,9 x 243,8 cm)
x62
2" (5,1 cm)
FLOOR PANELS
187-7/16"
(476,1 cm)
187-7/16"
(476,1 cm)
Attach the 48 x 96" panel with the rough side up (painted-grid lines side) with the 48"
edge and corner flush to the floor frame
(Fig A)
. Secure panel with two 2" nails in the
corners.
Fig. B
Flush
(2)
Nails
(2)
Nails
Grid lines up
12"
(30,2 cm)
Flush
Fig. A
Flush
3/4"
(1,9 cm)