Yardistry CAROLINA, Инструкция по установке и эксплуатации

Страница: 19 / 42

19
support@yardistrystructures.com
Note: The bevelled ends on each
gusset should always face away from
the wood it is attaching to.
A: Make sure the assembly is still
square and level then facing one Beam
Assembly - Side place one (705) Gusset
Right on the right hand side so the top fits
tight to the Beam Assembly - Side and
the bottom fits tight to the Post Assembly.
Attach gusset to Beam Assembly - Side
with two 5/16 x 4” Hex Bolts (with 5/16”
lock washer, 1/4-5/16” large washer and
5/16” t-nut). Pre-drill with a 1/8” drill bit
then attach gusset to Post Assembly with
three 1/4 x 1-15/16” Lag Screws (with
1/4-5/16” large washer). Repeat for the
left hand side with one (706) Gusset Left.
(fig. 6.1 and 6.2)
B: Repeat Step A for Beam Assembly -
Front/Back using two 5/16 x 2-1/4” Hex
Bolts (with 5/16” lock washer, 1/4-5/16”
large washer and 5/16” t-nut) to attach
gussets to Beam Assembly - Front/Back.
(fig. 6.1 and 6.2)
C:
Repeat Steps A and B so all 8 gussets
are attached. (fig. 6.1 and 6.2)
Step 6: Attach Gussets
Fig. 6.1
Tight
4 x (705) Gusset Right
4 x (706) Gusset Left
Hardware Wood Parts
24 x 1/4 x 1-15-16” Lag Screw (1/4-5/16” large washer)
8 x 5/16 x 4” Hex Bolt (5/16” lock washer, 1/4-5/16” large washer,
5/16” t-nut)
8 x 5/16 x 2-1/4” Hex Bolt (5/16” lock washer, 1/4-5/16” large
washer, 5/16” t-nut)
Fig. 6.2
(706)
Gusset
Left
Post
Assembly
(705)
Gusset
Right
(706)
Gusset
Left
5/16”
T-nut
5/16” Lock
Washer
5/16 x 2-1/4”
Hex Bolt
5/16 x 4”
Hex Bolt
(705) Gusset
Right
(706)
Gusset
Left
(705)
Gusset
Right
(706)
Gusset
Left
(705)
Gusset
Right
(705)
Gusset
Right
(706)
Gusset
Left
Beam
Assembly -
Front/Back
Beam
Assembly -
Side
Beam
Assembly -
Side
Beam
Assembly -
Side
Beam
Assembly -
Front/Back
Beam
Assembly -
Front/Back
1/4 - 1-15/16”
Lag Screw
1/4 - 5/16”
Large Washer
1/4 - 5/16”
Large Washer
1/4 - 1-15/16”
Lag Screw