Step 10.
Center the floorboards and fasten them with 1 1/2” vinyl screws.
(6G)
Step 11.
After the floor is finished assemble the railing section using three
56” 2x6’s, 2x6 corner brackets (6A) and 6 7/8” threaded rods with
washers and acorn nuts.
Two of the 2x6’s have vinyl caps on one end, these caps get placed
on the side with the 74” 4x4’s.
Step 12.
Fasten the top and bottom of each 2x6 corner bracket with 1 3/4”
washer head screws.
Step 9.
Lay the floorboards (1I) into position.
Notice the narrow one in the center and the two short ones on
either side.