8
Fasten floorboards using 1 1/2" screws provided.
Repeat steps 4-7 to assemble the "top ring."
Tighten all bolts using 9/16" deep socket and 9/16"
open end wrench.
Again, keep in mind that over-tightening can damage
acorn nut.
Complete main structure assembly by fastening "lips"
of corner braces to 2x6's using 1 3/4" washer head
screws provided. Each bracket will use four screws
except the bottom side of the "sandbox ring."
The next step is to fasten the slats to the 2x6 to complete
the railing. Top of template should be flush with top of
2x6. Fasten slats using 1 3/4" screws provided.
Prior to fastening the slats, understand exactly where
you will be attaching the slide, step ladder, cargo net,
rock wall, swing frame, or any other components you
may have purchased with your playset.
The following
steps specify how many slats each side should receive.
Step 17:
Step 20:
Step 19:
Step 18:
Phobos
Vinyl Playset
Assembly Manual
