7
Place 4x4x128" labeled "6" in corner.
Align pre-drilled
holes on 4x4 with pre-drilled holes on 2x6. Using 6 7/8"
bolts, begin fastening 2x6's to tower 4x4. Thread acorn
nut onto rod as far as you can, then back off several
turns. Be sure to place flat washer between acorn nut
and vinyl. Bolts should be flush with outside of 2x6
before putting on the bracket.
Lay out four 2x6x44" as shown. Also notice the pre-
drilled hole pattern on this 2x6. You can also place 6
7/8" bolts with an acorn nut and washer on one side, in
the pre-drilled holes, as shown. This will be the
placement of the framing for 7' and 5' decks. Lower deck
framing consists of two 2x6x50 (with joist hangers
attached) and one 2x6x44.
Notice two outside 2x6x50" with joist hangers attached.
Begin fastening 2x6x44." (This should have joist
hangers attached on inside). Fasten with acorn nuts
and washer at this end only for now.
6WHS
13
:
6WHS
16
:
6WHS
15
:
6WHS
14
:
Hyperion Vinyl Playset
Assembly Manual
Содержание Hyperion
Страница 1: ...Assembly Manual Hyperion Vinyl Playset...
Страница 3: ...Parts List note numbers on these six pieces...