YardCraft Hyperion, Инструкция по сборке

Страница: 12 / 28

12
Complete top ring assembly using four corner brackets.
Tighten all the nuts on top ring.
6WHS 33 :
6WHS 36 :
6WHS 35 :
6WHS 34 :
Identify two 2x6x50"(cap on one end) and one
2x6x44" and fasten on lower deck. This frame will
receive two corner brackets.
Tighten all nuts on lower ring.
Before continuing , refer to print to know where all the
components will be fastened to main tower. Then, using
patterns provided, fasten poly slats at the proper
positions using 1 3/4" screws provided.
Assembly instructions for components can be found on
pages 25-28.
Install small access ladder between two towers
using four 1 1/2" screws provided. Make sure to
fasten underneath deck as well.
Hyperion Vinyl Playset Assembly Manual