ROOM VALET
™
Visual Alerting System
Guest Room Instructions for the
The Room Valet™ is distributed by HARC™ Mercantile, Ltd., and installed by
this property for your safety, comfort and convenience. Rest assured that your
best interests are of primary concern. Enjoy your stay with peace of mind.
Warning: This equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and found
to comply with the limits for a Class A computing device pursuant to Subpart J
of Part 15 of FCC Rules, which are designed to provide reasonable protection
against such interference when operated in a commercial environment. Opera-
tion of this equipment in residential area is likely to cause interference in which
case the user, at his own expense, will be required to take whatever measures
may be required to correct the interference.
This statement now appears on the front of most display panels and on a label
inside the user instruction brochure.
Room Valet™
Visual Alerting System
Note: The “System” normal condition is “ON” (green light in lower right
corner of display panel will be lit) meaning that the visual alert strobe and the
bed shaker, if installed, will activate whenever the phone rings, fire or smoke
alarm is activated, alarm clock set or the doorbell button is pushed.
To deactivate the visual strobe and bed shaker, push the area of the EAR in
the box adjacent to the green light. The light should go off.
The system will rearm to an “ON” condition at noon every day.
ROOM VALET
™
Visual Alerting System
Portage, MI
www.roomvalet.com
Distributed by
Directions
1. Locate the Room Valet Visual Display Panel
The Room Valet visual display panels should be located in
both the main living/sleeping area of the room or suite, as
well as the bathroom. Additional display panels should be
found in each separate living area of the room or suite.
2. Turning the Room Valet System On and Off
The Room Valet ON/OFF
control button is located at the
bottom right hand corner of
the display panel.
The button readies all the
special alerting features of
the Room Valet for those who
are hard of hearing or deaf.
Pushing the EAR symbol will
turn the system on or off.
A soft green light will appear
when system is on. The following things should happen
when the system receives an activation alert. 1) The built-in
strobe will begin flashing, 2) A graphic icon will illuminate
indicating the source of the alert signal, 3) at the same time
the bedshaker will vibrate, pulsing on and off.
Note: Emergency icons are red when lit. They are for
the in-room smoke alarm, the central fire alarm or voice
evacuation system etc. and require immediate and decisive
action. Informative icons are green when lit, letting you
know, for example, that someone is at the door, the phone
is ringing, or the alarm clock is sounding.
3) Testing the System
To be sure the system is turned on and ready to function,
test the phone alert by calling the hotel operator and
requesting that the room be called back. If the system
is on and fully functioning, you will see the strobe flash
and the green PHONE icon light and you should feel the
bed shake. If the strobes do not flash and/or the beds do
not shake, try ON button again. Repeat test. If still not
functioning, report the problem to the front desk and
request assistance.
Note: Even when the Room Valet is not turned on: 1) The
clock display will be visible, and the alarm clock portion
of the system will still function, but will have an audible
alarm only. 2) The door enunciator will also continue to
work with an audible signal only.
4) Setting the Room Valet Alarm Clock
To set the time: Push and hold the SET TIME button while
pushing either the FAST or SLOW button at the same
time, until the desired time (AM or PM) is reached. Note:
AM or PM indicator lights will show on display.
To set the wake-up alarm time: Push and hold the SET
ALARM button while pushing either the FAST or SLOW
button until the desired time (AM or PM) is reached.
Note: AM or PM indicator lights will show on display.
To activate wake-up alarm: Push ALARM ON button after
setting desired ALARM WAKE UP time. Alarm lights will
show on the display.
To turn wake-up alarm off: Push ALARM OFF button.
Alarm off lights will show on the display.
System ON Light
