Yard force LS C08 Скачать руководство пользователя страница 9

Страница: 9 / 16

SYMBOLS

Safety symbols

The purpose of safety symbols is to attract your attention

to possible dangers. The safety symbols and the

explanations with them require your careful attention

and full understanding. The symbol warnings do not, by

themselves, eliminate any danger. The instructions and

warnings they give are no substitutes for proper accident

prevention measures.

WARNING:

Be sure to read and understand all safety

instructions in this operator’s manual, including all safety

alert symbols such as “

DANGER

,” “

WARNING

,” and

“

CAUTION

” before using this tool. Failure to follow all

instructions listed below may result in electric shock, fire

and/or serious personal injury.

SAFETY ALERT SYMBOL

: Indicates

DANGER

WARNING

, or

CAUTION

. May be used in conjunction

with other symbols or pictographs.

Symbol meaning

This page depicts and describes safety symbols that may

appear on this product. Read, understand and follow

all instructions on the machine before attempting to

assemble and operate.

PRODUCT SAFETY WARNINGS

areas with plenty of clean water and consult a doctor

immediately.

− Remove the battery from the saw if you are not using

the saw for an extended period. This avoids damage that

could be caused by battery leakage.

− Always disconnect the charger from the power supply

after use.

− Always disconnect the charger from the power supply

before cleaning it.

Содержание LS C08

















Результаты поиска

Содержание LS C08

Отзывы:

Похожие инструкции для LS C08

Бренды по названию

Популярные бренды

Yard force LS C08, Оригинальное руководство пользователя

Результаты поиска

Содержание LS C08

Отзывы:

Похожие инструкции для LS C08

Бренды по названию

Популярные бренды