12
13
PRODUCT SAFETY WARNINGS
− During operation, always guide the saw with both
hands and assume a stable posture.
− Do not expose the saw to moisture. It must not get
damp and must not be operated in a damp environment.
− Prior to every use, please check the saw, the battery,
the retaining claw and the saw blade. Have a specialist
workshop repair damages before you use the saw.
− Wear aprotective breathing mask and protective
goggles when performing dusty work. Do not smoke
when performing dusty work and avoid open fire.
− Wear protective gloves when handling saw blades and
rough materials to cut injuries.
− Wear ear protection when performing work.
− Prior to carrying out any work, please take the battery
out of the saw.
− Do not leave any tool keys inserted. Safety notes
for rechargeable batteries and chargers This charger
may be used by children aged eight and over as well
as persons with impaired physical, sensory or mental
capacities or those lacking experience and knowledge
if they are supervised or have been instructed in how to
safely use the charger and have understood the risks
associated with operating it. Children must not play with
the appliance. Cleaning and user maintenance must not
be performed by unsupervised children.
− Children must be supervised to make sure that they do
not play with the saw, the charging device or the battery.
− Store the battery out of the reach of children.
− Do not charge any non-rechargeable batteries.
− Stop using the cordless drill, the rechargeable battery
or the charger if the plastic components exhibit cracks or
PRODUCT SAFETY WARNINGS
Safety instructions for the saw
− For your own safety, only operate the saw after you
have read the safety instructions.
− Hold the saw by the insulated gripping surfaces, when
performing an operation where the fitted tool may contact
hidden wiring. Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
− Only use sharp saw blades in proper condition.
Immediately replace any cracked, bent or dull saw
blades.
− Adapt fitted tools and the stroke rate to the material.
Ensure an even feed motion.
− Make sure that the permissible stroke rate of the
fitted tool is at least as high as the maximum number
specified on the saw. Accessories that move faster than
permissible may break and be projected.
− Only operate the saw if the saw shoe is mounted. When
working, the saw shoe must always be positioned on the
work piece.
− Only run the saw up to the work piece once it has been
switched on.
− Never process material containing asbestos. Use a
protective mask and dust extractor for other fibrous
material.
− Do not slow down the saw blade by applying side
pressure.
− Use clamping devices to secure the work piece and
prevent slippage.
− Always run the cable backwards away from where you
are working.
