22
23
DESCRIPTION OF PRODUCT
Parts description (Fig. A)
1. Blade
2. Retaining claw
3. Saw shoe
4. Blade holder
5. On/Off switch
6. Grip for rear hand
7. Main swtich
8. Battery pack
8. Saftey button
9. Battery pack
Delivery contents (Fig. B)
Carefully unpack the appliance and check that it is complete. Dispose of the packaging
material correctly.
a. Blades
b. Retaining claw
c. Garden saw body
d. Battery pack
e. Charger
f. Instruction manual
WARNING:
If any parts are damaged or missing, do not operate this tool until these
parts are replaced. Failure to heed this warning could result in serious personal
injury.
NOTE:
Always recycle the packaging in accordance with local recycling guidelines.
ASSEMBLY
Risk of injury!
Operating the sawblade or retaining claw when the battery is plugged in may lead to serious
injuries.
− Ensure that the battery is not inserted into the saw when operating the saw blade or the
retaining claw.
Risk of injury!
If you change the saw blades and the bracket without protection, this may lead to cuts or
burns from a hot saw blade.
− Wear protective gloves when changing the saw blade.
Risk of damage!
Using improper saw blades could damage the saw.
− When changing the saw blade, make sure that you only use saw blades with the adjacent
holding profile.
− Only saw blades with a 1⁄2 inch universal shaft may be used.
Inserting and removing the retaining claw (Fig. C)
Prior to inserting or removing the retaining claw , the saw blade must first be removed.
1. Ensure that the battery is not inserted.
2. In order to insert the retaining claw, press the locking button for the retaining claw.
3. Position the retaining claw over the saw shoe and insert the retaining claw into the
receiving slot.
4. Release the locking button for the retaining claw.
5. Check whether the retaining claw is securely positioned.
6. In order to remove the retaining claw, press the locking button for the retaining claw and
pull the retaining claw out of the receiving slot.
Changing the saw blade (Fig. D)
1. Ensure that the rechargeable battery is not inserted.
2. Open the saw blade holder by turning the locking mechanism of the saw blade holder in
an anti-clockwise direction to the stop point and by holding it firmly in this position.
3. If applicable, remove the blade by carefully pulling it out of the receiving slot. In- sert a saw
blade into the saw blade receiving slot until it clicks into place.
4. Release the locking mechanism of the saw blade holder so that it automatically rotates
clockwise, closing the saw blade holder.
5. Check whether the saw blade is firmly positioned and that the locking mechanism of the
saw blade receiving slot can not be turned any further in a clockwise direction.
If you change the saw blade after use, remove the sawdust from the saw blade holder before
hand.
