Yanmar ViO80-1A, Руководство пользователя по эксплуатации и обслуживанию

Страница: 78 / 215

9 Options
61
9.16.2 Mounting the accessory
1. Turn the switch (1) to ON.
The contactor switch indicator lights and the alarm sounds.
WARNING
If the warning light does not come on or if the alarm does not sound, stop the current
operation and contact your dealer.
2. Hold switch (2) in the locked position until the locking pins are completely released.
The green light comes on. The control rod is not visible.
WARNING
Do not perform this step if the control rod is visible. You might damage the control
rod engaging the quick hitch to the bucket or accessory.
3. Place the arm equipped with the quick hitch on the accessory to engage the accessory hooks
on the bucket or accessory pin.
4. Hold switch (2) in the locked position until the locking pins are completely retracted.
The green light comes on. The control rod is visible (C).
5. Rotate the quick hitch slowly lifting the boom to fully engage the quick hitch to the bucket
or accessory.
The control rod must be visible from the driving position.
6. Hold switch (2) in the locked position until the locking pins are completely released.
Note
The locking pins engage on the bucket or accessory to lock it.
The green light comes on. The control rod is not visible.
DANGER
Make sure that the control rod is retracted into the quick hitch and is no longer vi-
sible. Otherwise check the condition of the interface between the quick hitch and the
accessory (cleanliness, shock...).
It is forbidden to operate the bucket or the accessory if the control rod is still visible,
because in this case it is not installed on the machine and it may drop during use.
7. Manoeuvre the bucket or accessory to low height from the ground to see if it is locked in
the quick hitch.
8. Turn the switch (1) to OFF.
The light goes off and the alarm stops.
WARNING
For safety reasons, do not work with the machine until the power switch is in the OFF
position.