Yanmar ViO80-1A, Руководство пользователя по эксплуатации и обслуживанию

Страница: 58 / 215

6 O
PERATION OF THE AIR CONDITIONING
1 = Operating switch
2 = Ventilator switch: sets the ventilator
speed.
3 = Temperature joystick: allows setting the
desired temperature.
4 = Air diffusers
5 = air recycling
WARNING
Ice may form on the air intake if the air conditioning is running. This is normal and comes
from the condensation of water particles suspended in the air.
After long exposure to heat, run the air conditioning while opening the cab door and win-
dow to facilitate the circulation of air.
Correctly adjust the temperature; if it is too low it may be bad for health.
If the air circulates with difficulty in the cab, or if the air conditioning is ineffective, stop it
immediately (switch to OFF) and contact your dealer. Use under abnormal conditions may
damage the installation.
Every week, run the air conditioning at least once for a few minutes ; this will help to keep
the installation in good condition.
1 = Operating switch
2 = Ventilator switch: sets the ventilator
speed.
3 = Temperature control switch: allows sett-
ing the desired temperature.
1. Activate the operating switch (1). (1)
2. Set the ventilator selector switch (2) to
the desired position.
3. Set the temperature ventilator selector
switch (3) to the desired position.
4. Then the temperature is adjusted by ac-
tivating the control lever and the ventilator
switch / selector.
Note
When the switch is at OFF, the light is
off and the compressor does not work,
even if the operating switch is at ON.
41